بهینهسازی فرآیند حذف رنگزا از پساب رنگی با استفاده از باکتری نمکدوست هالوموناس سویه D2 در کشت ایستا | ||
| فصلنامه علوم محیطی | ||
| مقاله 6، دوره 17، شماره 4، دی 1398، صفحه 91-106 اصل مقاله (659.14 K) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.29252/envs.17.4.91 | ||
| نویسندگان | ||
| علی پرتوی نیا* 1؛ مریم اوتادی2؛ امیرحسین علاالدینی2 | ||
| 1گروه پالایشزیستی، دانشکده مهندسی فناوریهای نوین، دانشگاه شهید بهشتی، تهران، ایران | ||
| 2گروه مهندسی شیمی، دانشکده فنی مهندسی، دانشگاه آزاد اسلامی واحد تهران مرکز، تهران، ایران | ||
| چکیده | ||
| سابقه و هدف: امروزه پساب صنعتهای مختلف شامل مواد معدنی و آلی خطرناک از جمله ترکیبهای آروماتیک نظیر فنولها، فلزهای سنگین و رنگزاها میباشند که بیشتر در غلظتهای خیلی کم نیز سبب سرطان و مسمومیت میشوند. با توجه به روند افزایشی این آلایندهها و بویژه ترکیبهای رنگزا در محیطزیست، مطالعه و توسعه روشهای جلوگیری از ورود و یا حذف این آلایندهها دارای اهمیت میباشد. تولوئیدین قرمز یک رنگزا دارای گروه آزو است که بطور گسترده در صنایع نساجی برای رنگ آمیزی الیاف سلولزی استفاده میشود. بطور کلی روشهای مختلف شیمیایی، فیزیکی، زیستی، نوری و یا تلفیقی برای حذف انواع آلایندهها و رنگزاها از محیطزیست وجود دارد. در سالهای اخیر روشهای زیستپالایی نظیر تجزیهزیستی بعنوان یک روش کارآمد برای حذف این آلایندهها مورد توجه قرار گرفته است. از اینرو، هدفهای مطالعه حاضر، شامل بررسی میزان حذف رنگزا تولوئیدین قرمز از یک پساب رنگزای سنتزی، بررسی متغیرهای اثرگذار بر میزان حذفزیستی و بهینهسازی با استفاده از تکنیک سطح پاسخ میباشد که برای این بررسی باکتری نمکدوست هالوموناس سویه D2 مورد استفاده قرار گرفته است. مواد و روش ها: در این تحقیق، بررسی وضعیت تأثیرگذاری متغیرها و بهینهسازی شرایط عملکردی با استفاده از روش آماری و نرمافزار Design Expert نسخه 7 انجام شده و میزان تجزیهزیستی رنگزا با در نظر گرفتن 30 آزمایش با استفاده از روش رویه پاسخ (RSM) و طرح ترکیب مرکزی (CCD) بررسی شده است. با توجه به منبعهای مطالعاتی و تحقیقهای انجام شده قبلی در این راستا که بصورت یک عامل در یک زمان (OFAT) انجام شدهاند، اثر 4 متغیر غلظت رنگزا (ppm 30-10)، غلظت نمک (10%-2)، pH (5/9-5/5) و دما (40-20) در حذفزیستی رنگزا مورد بررسی قرار گرفته است. آزمایشهای حذفزیستی در فاز آبی برای یک پساب سنتزی مدل، در مقیاس ارلن و کشت ایستا در انکوباتور برای مدت زمان 10 روز انجام شده است. در ادامه تجزیه و تحلیل نتایج با روش آنالیز واریانس انجام شده است. نتایج و بحث: بر طبق نتایج بهدست آمده و آنالیز واریانس، از بین 4 فاکتور انتخابی دو متغیر غلظت نمک و دما بیشترین تأثیر در میزان حذفزیستی رنگزا توسط باکتری در محدوده انتخابی داشتهاند و همینطور با توجه به نتایج آنالیز آماری میتوان گفت که غلظت رنگزا و pH احتمالاً اثرگذار بودهاند. همچنین اثرهای متقابلی مربوط به غلظت رنگزا و pH، غلظت نمک و pH، غلظت نمک و دما (در سطح 5%) بر میزان تجزیهزیستی پساب رنگی تأثیرگذار میباشد. از طرفی بیشترین میزان حذفزیستی رنگزا در پایان روز دهم معادل %62.4 محاسبه شد و شرایط بهینه برای بیشترین حذفزیستی رنگزا در این روز درpH معادل 8.5 و دمای 35 درجه سانتیگراد، غلظت نمک و رنگزا به ترتیب معادل %4 و ppm 16.8 بهدست آمده است. در ادامه با استفاده از روش سطح پاسخ، تابع چند جملهی درجه دوم برای میزان درصد حذف رنگزا از پساب در مدت زمان 10 روز با ضریب تعیین R2 معادل 0.95 بیان شد. همچنین متوسط خطا در بررسی میزان تجزیهزیستی پساب رنگزا با استفاده از مدل مطرح شده و دادههای آزمایشگاهی بطور متوسط 9.9 درصد محاسبه شد. نتیجهگیری: بر اساس نتایج، تابع درجه دوم پیشنهادی در این تحقیق برای باکتری نمکدوست هالوموناس سویه D2 در حذفزیستی رنگزای تولوئیدین قرمز، میتواند بعنوان یک مدل با دقت بالا و قابلیت پیشبینی مؤثر شرایط مختلف، مورد استفاده قرار گیرد. همچنین باکتری هالوموناس سویه D2 در این تحقیق، مشابه نتایج بهدست آمده از تحقیق قبلی ما با استفاده از سویه Gb توانایی بالایی در تجزیهزیستی رنگزا در محیطهای نامساعد و شور نشان داد، با این تفاوت که شرایط بهینه متفاوت بوده و سویه D2 برای استفاده در محیطهای بازی پیشنهاد میشود. | ||
| کلیدواژهها | ||
| باکتری هالوموناس D2؛ بهینهسازی؛ پساب صنعتی؛ تجزیهزیستی؛ رنگزا تولوئیدین قرمز | ||
| عنوان مقاله [English] | ||
| Optimization of dye effluent decolorization by halotolerant Halomonas strain D2 in static culture condition | ||
| نویسندگان [English] | ||
| Ali Partovinia1؛ Maryam Otadi2؛ Amirhossein Alaedini2 | ||
| 1Biorefinery Department, Faculty of New Technologies Engineering, Shahid Beheshti University, Tehran, Iran | ||
| 2Department of Chemical Engineering, Faculty of Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran | ||
| چکیده [English] | ||
| Introduction: Nowadays, the industrial effluents contain mineral and organic hazardous materials such as phenols, heavy metals, and dyes, which are carcinogenic and poisonous compounds even at low concentrations. An increase in such components especially dyestuffs in the environment makes the remediation of these pollutants valuable. Toluidine Red is a pigment containing azo groups, which is invasively used in different industries. There are several chemical, physical, biological, optical, and combinational methods for different pollutant removal from the environment. In recent years, the bioremediation technique has been considerably developed as an effective method in pollutant removal. Therefore, the goal of this study was to optimize the Toluidine Red removal from the synthetic dyes wastewater by Halomonas strain D2 in static culture conditions. In this survey, optimization and variables’ effectiveness study was performed by the response surface methodology (RSM). Material and methods: In this research, the effectiveness status of variables and optimum conditions were studied by the statistical approach of Design Expert V.7 software. Biodegradation of dye was investigated by 30 experiments according to the Central Composite Design (CCD) and RSM. According to previous related research performed by one factor at time (OFAT), the effects of four variables of dye concentration, NaCl salt concentration, pH, and temperature on bioremediation at 10-30 ppm, 2-10 %, 5.5-9.5 and 20-40 °C, respectively, were studied. Bioremediation experiments in the aqueous phase of the synthetic model effluent have been performed in shake flask scale and static culture condition in an incubator for 10 days. Then the analysis of the resulted data was performed by analysis of variance. Results and discussion: According to the results and analysis of variance, salt concentration and temperature are the most significantly effective variables on bioremediation in the studied range while pH and dye concentration were probably less significant. Furthermore, the interactive effect of dye concentration and pH, salt concentration and pH as well as salt concentration and temperature were in a 95% effectiveness possibility limit. On the other hand, the maximum dye removal was observed on the 10th day of the experiment with 62.4%. The optimum condition for bioremediation was observed at a pH of 8.5, the temperature of 35 °C, and salt and dye concentrations of 4% and 16.8 ppm, respectively. By RSM, a correlation of second order for dye removal percentage after 10 days was presented with R2 equal to 0.95. The average error of the proposed correlation and real experimental data was about 9.9%. Conclusion: The second-order correlation proposed in this paper can effectively predict the different operational condition effects on removal of Toluidine Red by Halomonas strain D2 that is a useful bacterium in dye biodegradation. Comparing this survey with our previous study, which was about decolorization by Gb strain, shows that the optimum condition is different for each strain type. On the other hand, D2 strain performance was higher in the basic condition in comparison with strain Gb, however, in acidic conditions, the Gb strain’s performance was better. | ||
| کلیدواژهها [English] | ||
| Halomonas strain D2, Industrial effluents, Bioremoval, Toluidine red, Optimization | ||
| مراجع | ||
| ||
|
آمار تعداد مشاهده مقاله: 13,166 تعداد دریافت فایل اصل مقاله: 7,548 |
||
